It’s not just the inside of the home that needs cleaning on a consistent basis.
The siding of mobile homes accumulates debris, grime, mildew, and mold that need to be cleaned as well.
That said, when it comes to cleaning your mobile home, pressure washing provides an efficient and faster way to clean your mobile home’s exterior.
But, How Much Does It Cost To Pressure Wash A Mobile Home?
Well, it depends. Typically, hiring professional pressure washing services costs around $0.08 and $0.35 per square foot but can go as high as $0.40 to $0.80 per square foot. The exact cost will depend on average local rates and the types of stains, dirt, molds, and other problems.
If you want your entire mobile home pressure washed, you can expect to pay about $500 to upwards of $1,400, depending on the average local rates, condition, and size of your home.
Read on to find more on pressure-washing mobile homes.
What Is Pressure Washing?
At its core, pressure washing is the use of a pressure washing machine to clean out both mild and tough stains from the walls and floors of your home.
A pressure washing machine is basically a mechanical sprayer that applies pressure used to clear out dirt, loose paint, mold, mud, dust, and grime from surfaces of buildings, vehicles, and several other objects.
A pressure washer consists of either an electric, hydraulic, internal combustion, or a pneumatic motor that controls the high-pressure water pump and hose and triggers the gun-style switch.
It also has a nozzle that increases or reduces pressure and creates high velocity.
Seven Mobile Home Pressure Washing Tips
It is simple to pressure wash a mobile home on your own.
However, if you find it challenging, you can hire a cleaning agency and pay them to clean your home.
For those of you who think that hiring is expensive, you can still DIY by considering the following tips.
You need to prepare well before starting to pressure wash your home.
Ensure you get the right pressure washer for your home and the type of siding in your home. You also need to source a pressure washer detergent to get the whole work done.
Typically, different pressure washers use different detergents and are designed to perform different tasks.
For clarity, make sure you read the instructions on the manuals of the washing machine model you are using. To add on, you should know how to set up and select different spray patterns.
2. Clear Your Way
Before you start cleaning, you need to get the area ready by clearing all obstacles that may hinder you from cleaning effectively.
Start by turning off the lights and any other fixtures in your home.
If any plants are nearby, make sure you cover them up to avoid getting damaged by the cleaning soap.
Close all windows and doors to avoid chances of nasty accidents happening.
3. Identify The Power Of The Pressure Washer You Are using
Pressure washers clean out tough dirt from different home areas by utilizing its speed, strength, and power.
In regard to the design, power washers are effective cleaning tools but can also be very risky, especially if mishandled.
Make sure you wear protective clothing when pressure washing your house because the pressured water for your machine can easily splash on your skin and harm yourself.
When using it, tightly grasp the handles, so they don’t recoil in your hands when using the pressure washer.
Always start with the lowest setting and adjust it gradually while avoiding directing the nozzle towards pets and other people around the house.
4. Consider Changing The Nozzle Tips
Different areas get access to different levels of dirt. For this reason, pressure washers are designed to hold different types of nozzles that range from widespread nozzles to narrow spray streams.
Wide nozzles are used to clean the home’s sidings, whereas narrow nozzles remove dirt effectively on the floors and concrete surfaces.
The most narrow tip has the highest power and thus can be used to remove stubborn dirt and hard stains.
5. Soap The Areas To Be Cleaned
For efficient and effective cleaning, always start by applying soap on the sidings and specific areas to pressure clean.
Every pressure washer has a soap attachment or siphon tube, mainly by applying soap to surfaces and sides.
When using the pressure washer to apply soap, make sure it is at the lowest setting and make overlapping strokes.
Try as much as possible to avoid over-excitement while pressure washing your home; you may end up missing some sports.
6. Ensure You Have Enough Water
Adequate water supply is very important when pressure washing a mobile home because water starvation can damage the pressure washer elements.
Check the number of gallons your pump requires per minute and make sure the water supply can meet the stated requirements.
7. Start Washing Gradually And Consistently
First off, use the pressure washer brush to loosen dirt and rinse the soap mixture away. While standing at a reasonable distance, start to spray the sidings with the lowest pressure.
Avoid spraying directly on vents, light fixtures, and eaves because a pressure cleaner can easily damage such fixtures of a home.
If you are spraying on horizontal sidings, you should aim downwards to avoid spraying under the laps.
Similarly, spray downwards on a vinyl surface or siding to avoid buckling under pressure.
Be very systematic while washing your home to avoid leaving out some parts.
Clear out all the soap you had earlier applied on the surface. In case you identify some stained sport after you are done rinsing, you may need to re-soap it and rewash it to clear out the stain.
Three Things To Avoid When Pressure Washing Your Mobile Home
For your safety and that of your home, you need to avoid some things that are likely to interfere with the functionality of your machine and, worse, cause you harm.
1. Avoid Hot Water And Strong Chemicals
If you are cleaning your mobile home exterior, avoid using hot water or harsh chemicals.
Hot water has no great harm to your home, but all the same, there is no need to use it.
Coldwater can still work best.
Harsh chemicals can easily ruin your landscaping. Avoid pressure washing the windows because you might break the window seals.
2. Don’t Use The Pressure Washer On Everything
Whether you have set your pressure washer at low pressure and are very careful, there are some areas where you should not direct the pressure washer’s nozzle.
For example, areas that seem to be torn or worn out should only be cleaned with a hose or hands to avoid increasing the damage.
Obviously, you don’t wish to start a cleaning project that will leave you with a nightmare of lots of repair work.
3. Never Refuel While The Pressure Washer Is Running
In most cases, washing a mobile home may not consume a lot of time.
However, if it happens that you run out of fuel while pressure washing, do not by any chance think of refueling the system while it’s running.
You need to turn it off and refill it before proceeding with the cleaning project.
If you are using a machine with an electric motor, keep the electric cord clear because under no circumstance should electric and water mix.
Using pressure water to clean your mobile home is possible, simple, and relatively cheap.
All you need is to identify the right pressure washing machine and take necessary precautions to ensure safety.
Hopefully, this article will be of great benefit to you if you are planning to pressure wash your mobile home for the first time.